It sounds like you are looking for the Mighty Cord RV Power Cord Generator Adapter, # A10-G30430VP. The 3-prong female plug connects to the power cord and the twist-lock male plug connects to your generator. view full answer...
Yes, we have just what you're looking for.
The Mighty Cord Generator Adapter Y-Cord # A10-G3020Y has a male 30-amp plug to match the outlet on your generator # 289-SUA2000I that splits to two female outlets that will accept standard 110-volt devices. Overall length is approximately 36-inches.
Please refer to the linked photo that shows you all connectors on this item. view full answer...
We do have some generator adapter cords rated for 50 amps:
Cord # A10-G30450VP is a 50 amp female to 30 amp male twist lock
Cord # A10-50X30Y is a Y-Cord with a 50 amp male plug and two 30 amp female plugs
Cord # CAM55412 is a 125 volt 30 amp twist lock male and 50 amp female view full answer...
It sounds like you are looking for the Mighty Cord Generator Adapter for RV Power Cord part # A10-G30450VP which has both the 50 amp female and 30 amp male 4 prong twist lock plugs that you need. If this is not what you were looking for then please just let me know. view full answer...
I am not completely sure what you mean by 50 amp female with cover. But we currently have 2 cords that have a 50 amp female plug on one end and a 30 amp plug on the other end.
- Mighty Cord RV Power Cord Adapter w/ Pull Handle - 50 Amp Female to 30 Amp Male # A10-3050EHD
- Mighty Cord RV Power Cord Adapter - 50 Amp Female to 30 Amp Male # A10-3050EDBK view full answer...
I found a extension cord that will work for you.
The Camco Power Grip RV Power Cord w/ Pull Handle - 30 Amp - 25' # CAM55501, has both a 30 amp male and female connection. The cord measures 25 feet in length which should give you more than enough length from your generator to your plug adapter. Then you will be able to position your extension cables out of the weather if necessary. view full answer...
The trailer wiring harnesses offered for your 2012 Ford E-250 Van include 4-pole flat and 7-way RV style harnesses that can be seen on the linked page. An equivalent 5-pole harness is not made but we do have adapters that will let you convert your 4-pole to a 5-pole.
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 plugs in to your existing 4-pole harness and includes an additional blue wire and quick-splice connector to allow you to connect to a trailer with a 5-pole connector... view full answer...
We have many RV-to-generator adapter products that are shown on the linked page. These come in varying lengths and with many different connector fittings.
If you click on the type of fitting you need for each end, both generator and adapter ends, you will then see just the items that will work for you. For example, for an adapter with a 50-amp female on one end and a 4-prong 30-amp male twist lock on the other you can use # CAM55422. view full answer...
Unfortunately, you are not able to combine different circuits on a single generator so the device you are searching for does not exist. If you were combining multiple generators like our Champion # CH99FR they are able to be combined using the included Parallel Kit # CH84FR to get up to a 50 amp circuit. I do not see that Predator offers a parallel kit for your 9500 watt generator. view full answer...
I have a solution for you, but the Hopkins Plug-N-Tow Wiring Harness, # 33525, will not fit the 2013 Nissan Frontier.
The Curt Wiring Harness with 4-Pole Flat Trailer Connector, # C56225, is confirmed to fit your 2013 Nissan Frontier truck. The wiring harness will include the needed relays that will activate the lighting functions on your Nissan Frontier.
I have attached a couple videos on this T-One harness for you to review. One is a general review of the harness and the other video... view full answer...
What I think you are saying is that you have the correct hose for connecting to your generator but you an adapter at the opposite end for mating the hose to a 100 lb. tank. I think what you are needing is the MB Sturgis Propane Adapter Fitting - Soft Nose POL x Type, # 204128-MBS. This lets you adapt a 100-lb propane cylinder fitting to a male Type 1 thread. view full answer...
We generally use a bracket like the Mounting Bracket # 18144 to permanently mount a 4-flat plug. You can use a few self-tapping screws to mount in on the bumper, or really wherever you want. We usually will attach the bracket to the cross-tube of the trailer hitch. view full answer...
General Motors quit offering the plug in type connectors on certain vehicles with a factory tow package. Instead of a quick-connect port under the dash you will have 4 or 5 blunt cut wires under the left side of the instrument panel to the left of the steering column. Therefore there is no adapter for your truck.
Four of these wires will simply connect to the four leads from the Prodigy P3 # 90195. The wires will connect as follows:
GM Red/Black connects to P3 Black
GM White connects... view full answer...
The Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers # 331-TPH-020 used with the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR is a fit for your 2019 Ram 1500 and will work great for you.
Included are additional video resources for more information. view full answer...
There are some adapters out there. But, they are often brand/accessory specific. The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 would allow you to use a Yakima BasketCase, most Yakima bike mounts, ski mounts and watersport accessories on your Subaru rack. But there are still some Yakima products they will not work for and they will not work for other brands.
There is not a generic universal adapter that works across all brands and products. If you can provide me... view full answer...
We do not offer any rubber bumper accessory item intended specifically for the Bulldog Collar-Lok Coupler, part # BD028657. However, we do have replacement rubber bumpers intended for other products and for general-purpose use and one of these might be adapted to your application.
For example, Redline offers a 1-inch round bumper, part # 386000, which is a general-purpose
bumper with a 1/4 inch recess and 1-8 inch mounting hole. It is 13/16 inch tall.
The best item I found that might... view full answer...
It sounds like you're looking for the power adapter with a 4 pin connector on the end of it and I may have a solution for you, but the part you're seeking isn't available as a standalone part. However, the components you're looking for are available in the Replacement Power Adapter Kit with Wireless Remote for Single Color Diamond LED Light Strips # DG52691PB, which comes with the power plug and an adapter that has a 4 pin adapter on the end of it. Unfortunately the adapter end is not available... view full answer...
Yes, there is a plug-and-play harness for installing the Redarc Tow-Pro Elite Brake Controller # RED63RR in your 2023 Subaru Ascent with tow package.
You just need the Tekonsha Plug-In Wiring Adapter # 3062-P. This adapter connects to the wiring harness included in the Tow-Pro Elite # RED63RR kit, to provide the plug-and-play installation you are wanting. view full answer...
We do not offer any custom-fit wiring harnesses with a 5-Way flat plug already installed, but we do offer an adapter that you can use to convert an existing 4-Way plug to a 5-Way. Using part # 20036, you would simply plug the adapter into your 4-Way vehicle plug, and then connect the additional, blue wire to your vehicle reverse light wire, behind the tail light assembly.
This adapter kit includes a quick splice to make the installation very easy. You simply insert the adapter wire and... view full answer...
The 2020 GM factory rail kits were changed from 2019 so the correct adapter you'd need is the part # DM6333 and not the Curt # C16023 that you referenced as it fits the first generation of GM rail kits. view full answer...
Go To Results